Unable to connect to Internet on new Interface

Networking & Firewalls
1

I created a Camlan following Tom’s complete Getting started installation guide.

The interface Camlan has a DHCP server and shows up on the Dashboard. If i cannect my laptop to the network It receives a IP but does not connect to internet .
The rules i used are exactly as the video.

Block- TCP Destination The Firewall 443
Pass - IPV4 ! LAN net Allow all traffic.

All cameras are currently on the Lan and work fine , i ma just trying to lock them dow on theire on network as i have space.

I have checked everythibng Over & Over and i cannot see where i am going wrong with the rules.

Any direction would be appreciated.

2

Could be a DNS related problem. Verify that your laptop can resolve names, e.g. by running nslookup google.com in the command line.

3

Thanks for your reply,
I connected my laptop to the cacble connected to the camlan and use terminal the answer was Server camlan 192.168.XX.1 address 192.168.xx1 #53 server can’t find google.com REFUSED.

4

I’m assuming you use pfSense as the DNS server. From the two rules you described it seems you don’t allow DNS requests from the camera network. You need to add a rule for that and also enable the DNS server for the respective interface (select the interface of the camera network in the multi-select box on the DNS resolver settings page).

5

If your allow rule is “not LAN” then what you are saying is “allow everything that is not LAN”. Which would mean you are blocking your your LAN address.

6

I reinstalled Pfsense and followed LTS-video https://www.youtube.com/watch?v=fsdm5uc_LsU&list=PLjGQNuuUzvmsuXCoj6g6vm1N-ZeLJso6o - Timestamp 34.78 .

When i originally installed pfsense last year i had no problems and very thing worked. The only disfeerence this time is that i had to DMZ from my Virgin Medai fibre broadband Hub5x to PFS. ( not sure if this is causing the problem?)

As this is new install only a few days,I have noticed that there is no Rules on the WAN is this correct , could this be blocking this Interface?

I have removed the Block Rules but left the LAN rule - Allow all Traffic without the Lan Net still unable no connection.

All my devices/ cameras are on the Lan and are working well.

I receive a IP address from DHCP server and is listed on the dashboard & DHCP lease.

Any idea DNS Resover is enable and the Camlan is listed and set to ALL.

7

I reinstalled Pfsense and followed LTS-video https://www.youtube.com/watch?v=fsdm5uc_LsU&list=PLjGQNuuUzvmsuXCoj6g6vm1N-ZeLJso6o - Timestamp 34.78 .

When i originally installed pfsense last year i had no problems and very thing worked. The only disfeerence this time is that i had to DMZ from my Virgin Medai fibre broadband Hub5x to PFS. ( not sure if this is causing the problem?)