Trying to replicate my unifi wifi settings in aruba IAP 205

Good Evening

i have a unifi ap ac lite setup as follows in the controller
default vlan 1 used to give ap an ip address
vlan 10 main with ssid
vlan 20 security with ssid
vlan 30 IOT with ssid

im testing out an aruba iap205 and its very different to the unifi. do i need to tell it about all of the networks like in unifi.

i currently have 2 ssid’s setup on the aruba with vlans defined

the current unifi ap is plugged into a trunk port (1 untagged, 10 20 30 tagged)

just need a bit of guidance.

You might want to double check your switch is configured properly on your trunk port and double check you profile on the Aruba