Hi all,
I had power loss this day, I it seems something goes wrong with my bootup sequence… but I can’t find what.
Each time I need to physically power off / power to get the device booting… but it always power off by itself…
So my device never start.
It doesn’t look like the SG4860 red status led trouble (I already get it on another device, and it’s not the same case).
Any help is much appreciated.
If someone can have a look at my bootup sequence, thank you.
Why there is an acpi shutdown at the end ???
Here is my boot sequence :
SeaBIOS (version SageBIOS-20170207_214005-localhost.localdomain)
iPXE (http://ipxe.org) 00:14.0 C100 PCI2.10 PnP PMM+7FB7AF80+7FADAF80 C100
iPXE (http://ipxe.org) 00:14.1 C200 PCI2.10 PnP PMM 7FB7AF80 7FADAF80 C200
iPXE (http://ipxe.org) 00:14.2 C300 PCI2.10 PnP PMM 7FB7AF80 7FADAF80 C300
iPXE (http://ipxe.org) 00:14.3 C400 PCI2.10 PnP PMM 7FB7AF80 7FADAF80 C400
Press F12 for boot menu.
BIOS drive C: is disk0
\
Loading /boot/loader.conf.local
|
- __
_ __ / _|___ ___ _ __ ___ ___ _
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_
| |_) | _\__ \ __/ | | \__ \ __/ |_ _|
| .__/|_| |___/\___|_| |_|___/\___| |_|
|_|
+---- Welcome to Netgate pfSense Plus ----+ __________________________
| | / ___\
| 1. Boot Multi user [Enter] | | /`
| 2. Boot Single user | | / :-|
| 3. Escape to loader prompt | | _________ ___/ /_ |
| 4. Reboot | | /` ____ / /__ ___/ |
| 5. Cons: Serial | | / / / / / / |
| | | / /___/ / / / |
| Options: | | / ______/ / / _ |
| 6. Kernel: default/kernel (1 of 1) | |/ / / / _| |_ |
| 7. Boot Options | / /___/ |_ _| |
| | / |_| |
| | /_________________________/
+-----------------------------------------+ |
__
_ __ / _|___ ___ _ __ ___ ___ _
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_
| |_) | _\__ \ __/ | | \__ \ __/ |_ _|
| .__/|_| |___/\___|_| |_|___/\___| |_|
|_|
+---- Welcome to Netgate pfSense Plus ----+ __________________________
| | / ___\
| 1. Back to main menu [Backspace] | | /`
| 2. Load System Defaults | | / :-|
| | | _________ ___/ /_ |
| Boot Options: | | /` ____ / /__ ___/ |
| 3. ACPI :off | | / / / / / / |
| 4. Safe Mode :off | | / /___/ / / / |
| 5. Single user:off | | / ______/ / / _ |
| 6. Verbose :off | |/ / / / _| |_ |
| | / /___/ |_ _| |
| | / |_| |
| | /_________________________/
+-----------------------------------------+
Loading kernel...
/boot/kernel/kernel text=0x19c370 text=0xfe1240 text=0x17ddcc8 data=0x180 data=0x223710+0x3db8f0 0x8+0x1c8858+0x8+0x1d6fc8
Loading configured modules...
/boot/kernel/cryptodev.ko size 0x76f8 at 0x35a0000
/boot/kernel/zfs.ko size 0x5d7790 at 0x35a8000
/boot/entropy size=0x1000
can't find '/etc/hostid'
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT amd64 1400094 #1 plus-RELENG_23_09_1-n256200-3de1e293f3a: Wed Dec 6 21:00:32 UTC 2023
root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/obj/amd64/Obhu6gXB/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/sources/FreeBSD-src-plus-RELENG_23_09_1/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU C2558 @ 2.40GHz (2400.10-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 10737418240 (10240 MB)
avail memory = 8216940544 (7836 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 2 3 1
TCP_ratelimit: Is now initialized
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8074d3f0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8074d4a0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8074d550, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8076afd0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8076b080, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8076b130, 0) error 1
random: entropy device external interface
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
vtvga0: <VT VGA driver>
netgate0: <Netgate RCC-VE>
smbios0: <System Management BIOS> at iomem 0xf5e80-0xf5e9e
smbios0: Version: 2.7
acpi0: <CORE COREBOOT>
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> mem 0xdfe00000-0xdfe1ffff irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xdfe20000-0xdfe3ffff irq 16 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> mem 0xdfe40000-0xdfe5ffff irq 20 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0xdfc00000-0xdfc1ffff,0xdfc20000-0xdfc23fff irq 18 at device 0.0 on pci3
igb0: NVM V0.6 imgtype2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 00:08:a2:0c:ad:6f
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> mem 0xdfe60000-0xdfe7ffff irq 23 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0xdfd00000-0xdfd1ffff,0xdfd20000-0xdfd23fff irq 19 at device 0.0 on pci4
igb1: NVM V0.6 imgtype2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 00:08:a2:0c:ad:70
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <processor> at device 11.0 (no driver attached)
pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached)
igb2: <Intel(R) I354 (SGMII)> port 0x3000-0x301f mem 0xdfea0000-0xdfebffff,0xdff24000-0xdff27fff irq 18 at device 20.0 on pci0
igb2: EEPROM V1.8-0 eTrack 0x80000bec
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
igb2: Ethernet address: 00:08:a2:0c:ad:6b
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) I354 (SGMII)> port 0x3020-0x303f mem 0xdfec0000-0xdfedffff,0xdff28000-0xdff2bfff irq 19 at device 20.1 on pci0
igb3: EEPROM V1.8-0 eTrack 0x80000bec
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
igb3: Ethernet address: 00:08:a2:0c:ad:6c
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
igb4: <Intel(R) I354 (SGMII)> port 0x3040-0x305f mem 0xdfee0000-0xdfefffff,0xdff2c000-0xdff2ffff irq 20 at device 20.2 on pci0
igb4: EEPROM V1.8-0 eTrack 0x80000bec
igb4: Using 1024 TX descriptors and 1024 RX descriptors
igb4: Using 4 RX queues 4 TX queues
igb4: Using MSI-X interrupts with 5 vectors
igb4: Ethernet address: 00:08:a2:0c:ad:6d
igb4: netmap queues/slots: TX 4/1024, RX 4/1024
igb5: <Intel(R) I354 (SGMII)> port 0x3060-0x307f mem 0xdff00000-0xdff1ffff,0xdff30000-0xdff33fff irq 21 at device 20.3 on pci0
igb5: EEPROM V1.8-0 eTrack 0x80000bec
igb5: Using 1024 TX descriptors and 1024 RX descriptors
igb5: Using 4 RX queues 4 TX queues
igb5: Using MSI-X interrupts with 5 vectors
igb5: Ethernet address: 00:08:a2:0c:ad:6e
igb5: netmap queues/slots: TX 4/1024, RX 4/1024
ehci0: <Intel Avoton USB 2.0 controller> mem 0xdff35400-0xdff357ff irq 22 at device 22.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
ahci0: <Intel Avoton AHCI SATA controller> port 0x30c0-0x30c7,0x30e0-0x30e3,0x30c8-0x30cf,0x30e4-0x30e7,0x3080-0x309f mem 0xdff34000-0xdff347ff irq 23 at device 23.0 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahci1: <Intel Avoton AHCI SATA controller> port 0x30d0-0x30d7,0x30e8-0x30eb,0x30d8-0x30df,0x30ec-0x30ef,0x30a0-0x30bf mem 0xdff34800-0xdff34fff irq 16 at device 24.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff pnpid ORM0000 on isa0
uart0: <16550 or compatible> at port 0x3f8 irq 4 on isa0
ns8250: UART FCR is brokene> at port 0x2f8 irq 3 flags 0x10 on isa0
uart1: console (115200,n,8,1)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1199999794 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x8087 product 0x07db> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.03, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Generic Ultra Fast Media> at usbus0
umass0 on uhub1
umass0: <Generic Ultra Fast Media, class 0/0, rev 2.00/1.98, addr 3> on usbus0
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Mounting from zfs:pfSense/ROOT/default failed with error 5; retrying for 3 more seconds
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic Ultra HS-COMBO 1.98> Removable Direct Access SCSI device
da0: Serial Number 000000225001
da0: 40.000MB/s transfers
da0: 29184MB (59768832 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Configuring crash dumps...
No suitable dump device was found.
Filesystems are clean, continuing...
Mounting filesystems...
Mounting ZFS boot environment... done.
__
_ __ / _|___ ___ _ __ ___ ___ _
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_
| |_) | _\__ \ __/ | | \__ \ __/ |_ _|
| .__/|_| |___/\___|_| |_|___/\___| |_|
|_|
Welcome to Netgate pfSense Plus 23.09.1-RELEASE...
No dump devices found. Savecore not run.
...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/graphviz /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.34/mach/CORE
32-bit compatibility ldconfig path:
done.
7613
External config loader 1.0 is now starting... da0p1 da0p2 da0p3
Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C2558 @ 2.40GHz (2400.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
Done.
done.
Initializing................... done.
Starting device manager (devd)...ichsmb0: <Intel Avoton SMBus controller> port 0xefa0-0xefbf mem 0xdff35800-0xdff3581f irq 22 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
done.
Loading configuration....done.
Updating configuration...done.
Checking config backups consistency.................................done.
Loading cryptographic accelerator drivers...aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
done.
Setting up extended sysctls...done.
Executing early shell commands...Configuring WireGuard tunnels...wg0: changing name to 'tun_wg0'
igb0: link state changed to UP
igb1: link state changed to UP
2024-07-12T00:08:19.086215+02:00 - php-fpm 391 - - /rc.linkup: Itun_wg0: link state changed to UP
gnoring link event during boot sequence.
2024-07-12T00:08:20.237575+02:00 - php-fpm 391 - - /rc.linkup: DHCP Client not running on wan (igb1), reconfiguring dhclient.
igb1: link state changed to DOWN
done.
done.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Setting timezone...done.
2024-07-12T00:08:21.445418+02:00 pfs.johannaetgreg.fr php-fpm 390 - - /rc.linkup: DHCP Client not running on wan (igb1), reconfiguring dhclient.
2024-07-12T00:08:21.470283+02:00 pfs.johannaetgreg.fr php-fpm 390 - - /rc.linkup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf -p /var/run/dhclient.igb1.pid igb1 > /tmp/igb1_output 2> /tmp/igb1_error_output' returned exit code '1', the output was ''
Configuring looplo0: link state changed to UP
back interface...done.
Starting syslog...done.
Setting up interfaces microcode...done.
Removed leftover dhcp6c lock file: /tmp/dhcp6c_lock
Configuring loopback interface...done.
Configuring VLAN interfaces...done.
Configuring WAN interface...done.
Configuring LAN [fib_algo] inet.0 (bsearch4#41) rebuild_fd_flm: switching algo to radix4_lockless
interface...done.
Configuring VLAN_100_WAN interface...done.
Configuring VLAN_100_LAN interface...done.
Configuring BRIDGE_FBX_TV interface...Setting up gateway monitors...done.
done.
Configuring CARP settings...done.
Syncing OpenVPN settings...done.
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...done.
Setting up static routes...done.
Setting up DNSs...
Starting DNS Resolver...done.
Synchronizing user settings...done.
Configuring CRON...done.
Bootstrapping clock...done.
Starting NTP Server...done.
Starting webConfigurator...done.
Starting DHCP service...done.
Starting DHCPv6 service...done.
Configuring firewall......done.
Generating RRD graphs...done.
Starting UPnP service... done.
Starting syslog...done.
Starting CRON... done.
Starting package AWS VPC Wizard...done.
Starting package IPsec Profile Wizard...done.
Starting package Netgate Firmware Upgrade...done.
Starting package WireGuard...done.
Starting package nut...done.
Starting package acme...done.
tun_wg0: link state changed to DOWN
bridge0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
Uptime: 7m13s
Khelp module "ertt" can't unload until its refcount drops from 3 to 0.
umass0: detached
uhub1: detached
uhub0: detached
acpi0: Powering system off