After we deployed our proxmox cluster (4 nodes with additional chrono on backup server), we quickly discovered that existing unifi switches were not up to the task. Overall this is a really nice (though sometimes frustrating) experience for me.
Lucky enough we came across two used SN-2010 at a customer installation and I have some questions that I struggle with (Mellanox is entirely new to me, as are ONIE related topics).
Q1: how I imagine it the setup would be the following:
VLAN 10: Cluster communication and Chrono L2 LACP two cables one per switch
VLAN 20: Storrage L2 LACP two cables one per switch
VLAN 30: Backup L2 LACP two cables one per switch
Both switches are connected with an additional VLAN directly on the 100gbe port with two cables.
Is that a feasible setup or am I misunderstanding anything?
Q2: Can the above setup be configured and maintained via WebGUI of Onyx?
Q3: If it can not be maintained via web, we need to get used to ssh configuration of switches anyway, which OS should I go with?